Base Price :
$149 USD
No ORDER Form on this site. Please place your order on the mobile site :
|
New budget priced Zero-Hum Soapbar P90-Bucker
Genuine single coil sounds far superior to Sidewinders and 3 Coil humbuckers
Our new affordable Zero-Hum (noiseless) Offset Soapbar P90-Bucker & Twang-Bucker ....
with their dynamic 100% single coil sound.
In stock ready to ship.
This is our excellent new high-performing Offset Soapbar P90-Bucker, with it's dynamic 100% single coil sound it sounds heaps better than our non-event Sidewinder, and at $149 it's not expensive considering it is an excellent sounding noiseless P-90.
It is no deeper than a regular P-90 and will definitely fit all P-90 cavities, absolutely no routing needed. It sounds exactly like our 100% single coil sounding P90-Bucker which is a standard sized humbucker and that's really saying something. Also available in our Twang-Bucker design with Alnico rod magnets.
Also, this new Offset Soapbar is available with 53mm pole spacing .... as well as 50mm and 47.5mm pole spacings that provides perfect string-over-pole alignment regardless of bridge spacing. We supply the appropriate pole spacing according to the bridge specified in your order.
Attributes ...
-
Beyond excellent super dynamics, satisfying attack, lush bottom end, beautiful tone and highly versatile.
-
Like our regular P90-Bucker it's available as a Standard, Clean Bridge, C&B Neck as well as the Heavy variations.
-
Zero-Hum (noiseless) 100% single coil sound.
-
Optional 2, or 3 mounting screws for control over height, tilt and slant adjustments for optimum performance.
-
Optional Kinman Universal Soapbar cover for Gibson guitars -or- Korean Generic cover
-
Optional Non-Magnetic mounting plate is designed to accept 2 or 3 mounting screws.
Our Offset Soapbar Twang-Bucker sounds identical to the regular Twang-Bucker in the two demos below.
Our offset Soapbar P90-Bucker sounds identical to the regular P90-Buckers in the two demos below.
Technical & Application info:
-
Optional two -or- three mounting screws for precise control over height, tilt and slant adjustments for optimum performance.
-
Optional Kinman Universal Soapbar cover for Gibson guitars -or- Korean Generic cover for other brands
-
Optional Non-Magnetic mounting plate (illustrated below) is designed to accept 2 or 3 mounting screws.
Installation
Consider including our optional non-magnetic mounting plate kit, it makes install fast n easy because you don't have to drill holes in the precise position for the pickups mounting screws in cavity floors.
Kinman Soapbar non-magnetic Mounting Plate Kit
Optional with 3 mounting screws for precise adjustment control over height, tilt and slant
Connections
-
Bare wires for soldering.
-
Kinman connectors for plugging into a Kinman Strat, Tele or KHP-90 No-Soldering harness.
-
Gibson 2 wire & 5 wire Quick Connect circuit board connectors shown below.
Output Polarity:
-
in-phase with all other Kinman pickups
-
in-phase with Gibson and Copy humbuckers
-
opposite phase to Fender
Pot & Capacitor values
-
Best with 250k Ohm for Volume. Many Gibson's have 300k which is OK too. 500k causes thinner sound.
-
Normal Tone pot is 500k however to maximize clarity use a No-Load or alternatively a 1 Meg Ohm tone pot.
-
Normal tone cap value of 0.022µF in 63 ~ 100 volt Polyester. Smaller value lessen the severity of Treble cut, higher values increase it.
Cavity depth
-
No need to deepen the pickup cavity in ANY guitar that has normal cavities for P-90's.
Pole spreads
-
53mm pole spread for bridge position of Stratocasters or with any bridge having saddle spread of 54+mm.
-
50mm for Gibsons or bridges having saddle spread of 50mm ~ 54mm.
-
47.5mm for neck position of Gibsons and Epiphones. Assures perfect string-over-magnet alignment.
Covers
-
Kinman Universal Soapbar covers in genuine Gibson Cream, Warm White, Aged White and Black suitable for all 3 pole spreads.
-
Generic Korean covers
-
53mm pole spread for bridge position in Stratocasters Cream and Black only.
-
50mm pole spread available in White, Black, Cream and Chrome.
-
47.5mm pole spreads available in Black & Cream only.
-
Not suitable for Dog-Ear covers
Hook-up cable
-
The Budget P90-Bucker Soapbar has 3 conductor cable so it's phase reversible to match any other pickup.
-
Length is 380mm / 15".
Mounting hardware
-
2 or 3 Long 3-48 UNC mounting screws, Phillips drive.
-
2 or 3 Silicon Rubber tube springs.
-
handy drill guide template for positioning the screw holes in the virgin floor of the pickup cavity of a project guitar or guitars with freshly deepened cavities.
-
OPTIONAL extra: Soap-bar cavity mounting plate, including all screws and springs.
|